The Belkin BoostCharge 3-in-1 Foldable Qi2 charger (model WIZ029) charges an iPhone, an Apple Watch and AirPods at the same time, and folds flat to pack[1, 2]. The phone gets Qi2 magnetic charging at up to 15W, the watch and earbuds get 5W each, and the 36W power supply that runs all three is in the box[2].
Key facts
What is it, and how many devices does it charge at once?
The Amazon listing is Belkin’s 3-in-1 Magnetic Foldable Wireless Charger with Qi2 15W, model WIZ029[1, 2]. It has three spots: a magnetic Qi2 pad for the phone, an Apple Watch charger and a pad for earbuds, and all three charge at the same time[1].
The listing also offers a 2-in-1 version and two colours. Pick the 3-in-1 option if you want the earbuds pad[1]. Belkin sells a similar 3-in-1 stand that doesn’t fold (WIZ023) and a single-phone convertible stand (WIA008). Reviews and spec sheets for those don’t describe this charger.
Which phones, watches and earbuds does it work with?
Belkin lists every iPhone from the iPhone 12 through the iPhone 18 Pro Max, including the iPhone 17e and iPhone Air. The phone pad works through cases up to 3 mm thick[2].
For Android, Belkin lists the Google Pixel 10 and 11 models. Samsung Galaxy S25 and Z8 series phones or newer need a magnetic Qi2 or MagSafe case[2].
The watch charger is listed for Apple Watch Series 4 through Series 10. The earbuds pad is listed for AirPods (3rd generation) with the MagSafe case, AirPods 4 with Active Noise Cancellation, and AirPods Pro[2]. Belkin’s list stops at Series 10, so check with Belkin first if your watch is newer. iPads don’t charge wirelessly, so this charger can’t charge one.
How fast does it charge, and what powers it?
The phone pad delivers up to 15W over Qi2. The watch charger and the earbuds pad deliver 5W each[2]. Belkin says the watch charger fast-charges Apple Watch Series 7, 8 and 9, Ultra and Ultra 2 from 0 to 80% in about 45 minutes, based on its own lab test with a Series 9[2].
15W is the top wireless speed for an iPhone 12 through 15. The iPhone 12 mini and 13 mini stop at 12W[3]. The iPhone 16 and later can charge at 25W on newer Qi2.2 chargers, so on this stand they get 15W[4].
Power comes from the 36W USB-C power supply in the box. Belkin and the Amazon listing agree on it[1, 2]. Use that supply. A weaker USB-C charger can’t run all three spots at full speed.
How big is it, and what’s in the box?
Belkin gives the size as 5.7 × 6.2 × 0.8 inches (144 × 157 × 19 mm), and the 19 mm is its folded thickness. The phone stand tilts up to 65°[2].
The box holds the charger, the 36W power supply and a 5 ft (1.5 m) USB-C to USB-C cable[2]. The Amazon listing names the same power supply and cable[1].
What does it cost, and what’s the warranty?
Amazon’s price changes often, so check the listing for today’s price[1]. Belkin covers the charger with a two-year warranty. Its Connected Equipment Warranty also repairs or replaces devices damaged by an electrical charge while properly connected[2].
How do you set it up for reliable charging?
Put it on a hard, flat surface and plug it into the power supply that came with it. Take the phone out of any case thicker than 3 mm, and out of wallet cases or cases with a metal plate. Those weaken the magnets and slow the charge[2]. Keep coins, keys and cards off the pads, as with any wireless charger.
If the phone doesn’t snap into place or charges slowly, check the case first. Next, check that the 36W supply is the one plugged in.
How does it compare with MagSafe and plain Qi chargers?
Qi2 is the Wireless Power Consortium’s magnetic charging standard, built on the magnet ring Apple introduced with MagSafe. The magnets line the phone up with the charging coil, which is what allows 15W. A plain Qi charger without magnets charges an iPhone at 7.5W at most.
The newest chargers go further. Qi2.2 chargers reach 25W on an iPhone 16 or later running iOS 26[4]. This Belkin is a 15W Qi2 charger. That’s full speed for an iPhone 12 to 15, and a little slower than the best for newer iPhones.
Pros and Cons
Pros
Final Verdict
Get the Belkin BoostCharge 3-in-1 Foldable if you carry an iPhone 12 or later, an Apple Watch and AirPods, and want one plug for all three at home and on the road. It folds flat, and the power supply is included[2]. Look elsewhere if you want the fastest wireless charge for an iPhone 16 or 17, or if your Apple Watch is newer than Belkin’s compatibility list[2, 4].
Key Takeaways
- This is the foldable WIZ029. Specs for Belkin’s other Qi2 stands don’t apply to it[2].
- It charges at 15W for the phone and 5W each for the watch and earbuds[2].
- Check your exact watch and earbuds against Belkin’s list. Samsung phones need a magnetic case[2].
- Choose the 3-in-1 option on the Amazon listing, which also sells a 2-in-1[1].
Frequently Asked Questions
Can it charge an iPhone, Apple Watch and AirPods at the same time?
Yes. All three spots charge at once from the included 36W power supply[1, 2].
Does it fold?
Yes. It folds to 0.8 in (19 mm) thick for travel, and the phone stand tilts up to 65° when it’s open[2].
Does it work with an iPad?
No. iPads don’t support wireless charging.
Will it charge an iPhone 17 at 25W?
No. It’s a 15W Qi2 charger, so an iPhone 17 charges at 15W on it[2, 4].
What warranty does it have?
Two years from Belkin, plus Belkin’s Connected Equipment Warranty[2].
Sources
- Belkin Qi2 15W Wireless Fast Charging Station, 3 in 1 iPhone Charger (Amazon) (2026-10-31)
- Belkin: 3-in-1 Magnetic Foldable Wireless Charger with Qi2 15W (WIZ029) (2026-10-31)
- Gadget Hacks: iPhone 25W MagSafe charging compatibility by model
- Notebookcheck: iPhone 16 to support faster 25W Qi2 wireless charging with iOS 26
- Best Buy: Questions and Answers, Belkin 3-in-1 Stand 15W Qi2 Wireless Charger (WIZ023ttWH)
